MODEL-CPBP-500
120*170*320 cm size press case
Dual Piston Press
120*170*320 cm size press case, 200- 400 kg waste bale press
- 20*170*320 cm size press case
- 200- 400 kg waste bale press
- 120*80*100 cm size bales are compatible with truck case and container
- It ensures that all waste materials including nylon, cotton, paper, cloth, can, empty barrels, etc. are baled and crushed
- 5 kw three-phased electric engine
- complete steel construction and press chamber
- 120*80*165 cm bale vessel
- Movable front covers
- 4 wire channels
- 40 tons of pressure force
- 15 ton/day capacity
- Adjustable for desired kilogram
- Fully automatic, only the wires are manually connected
- Takes the bale out on its own
- All commands are electrical
- All risks have been prevented mechanically and electrically
- Complies with the CE norm.
VBP 50X30 HORIZONTAL SCRAP BALER
A scrap press machine in the “very powerful” body category that compresses waste such as metal and aluminum.
Bale size: 500×300 mm
Hopper size: 1200x500x500 mm
Cycle time: 90 sec (idle)
Control: Manual Motor power: 11 kW (optional 22 kW)
Pump: 71 cc variable displacement piston pump, 275 bar operating pressure.
Capacity: 2 tons per hour (may vary depending on the compressed material).
Press Body: ST52 ST37 steel plates, hardox 450 wear plate, hopper mouth with 4-way 55-58HRC blade.
Machine weight: Average 3000 kg.
VBP 40X60 HORIZONTAL SCRAP BALER
Horizontal scrap baler machine that compresses waste materials such as metal and aluminum with “very high” body strength category.
Bale size: 400×600 mm
Hopper size: 1350x600x650 mm
Cycle time: 90 sec (idle) Hydraulic cylinders: 1 x main cylinder 200-230 h pipe shaft 120 mm chrome shaft. 1 x upper cover cylinder 160-185 h pipe shaft 100 chrome shaft. 2 x 70-85 h pipe 40 chrome shaft.
Press force: Top piston 80 tons, bottom piston 120 tons. (total 200 tons)
Control: Manual Motor power: 11 kW (optional 22 kW)
Pump: 71 cc variable displacement piston pump, 275 bar operating pressure.
Capacity: 3 tons per hour (depending on the compressed material).
Press Body: ST52 ST37 steel plates with hardox 450 wear plate, 4-way 55-58HRC blade at hopper mouth.
Machine dimensions: 5500x1400x2400
Machine weight: Approximately 5000 kg
VBP 50X70 HORIZONTAL SCRAP BALER
Metal, aluminum, and similar waste materials can be compressed with a “very powerful” body category scrap press machine.
Bale size: 700×500 mm
Hopper size: 1500x700x730 mm
Cycle time: 100 sec (empty)
Control: Manual Motor power: 22 kW Pump: 71 cc variable displacement piston pump, 275 bar operating pressure.
Capacity: 4 tons per hour (depending on the compressed material).
Press Body: Steel plates and hardox wear plate
Hopper mouth: 4-way blade
Machine weight: Average 6500 kg
VBP 80X40 HORIZONTAL SCRAP BALER
Metal and aluminum waste baling press machine with a “very powerful” body category.
Bale size: 800×400 mm
Hopper size: 1800x800x750 mm
Cycle time: 110 sec (empty)
Control: Manual
Motor power: 30 kW
Pump: 71 cc variable displacement piston pump, 275 bar working pressure.
Capacity: 6 tons per hour (depending on the compressed material).
Press Body: Steel plates and Hardox wear plate.
Hopper mouth: 4-directional blade.
Machine weight: Approximately 9000 kg.